Drum: Usually made of stainless steel or wear-resistant materials, with a smooth surface to ensure that magnetic particles can be adsorbed and separated smoothly. Permanent magnets or electromagnetic coils are installed inside the drum to generate a magnetic field.
Drive Device: It provides power to make the drum rotate, generally composed of a motor, a speed reducer, and a coupling, etc. The drive device can precisely control the rotation speed of the drum to meet the separation requirements of different materials.
Frame: It supports the entire equipment. Usually, it is made of a steel structure and has sufficient strength and stability to ensure that the equipment will not shake or deform during operation.
Feeding Device: It uniformly conveys the materials to be separated onto the surface of the drum, ensuring that the materials can fully contact the drum under the action of the magnetic field and improving the separation effect.
Discharging Device: It includes components such as a scraper and a belt, which are used to scrape off the magnetic particles adsorbed on the surface of the drum or convey them to a designated collection container.
Manual-clean type:
Extract the grate ring by hand to clean, with the help of the bearing, it is very convenient for the labors to pull out the magnetic system, after pulling out, the magnetic system can be rotated 90 degrees to clean.
Sleeve Manual-clean type:
Comparing manual clean type,this design is very easy to clean because only need to clean the sleeve
it’s suitable for the situation which not need very strong strength.

Connecting ID

CASE L*W*H(mm)

Bar quantity

Peak gauss

DN150(φ159)

230*200*450

16000 GS

15000 GS

14000 GS

13000 GS

12000 GS

DN200(φ219)

250*250*45

DN250(φ273)

300*300*470

DN300(φ325)

350*350*510

Inquiry Cart 0